Changes between Version 11 and Version 12 of Internal/WimaxRG231

Timestamp:

Apr 23, 2014, 7:48:01 PM (10 years ago)

Author:

seskar

Comment:

—

Internal/WimaxRG231

@@ -12 +12 @@
 - password: oper1234
 
-You should now get extended menu under the '''Advanced Settings''' as shown in Figure 1.
+You should now get extended menu that includes '''WiMAX''' menu button once you switch to '''Advanced Settings''' mode as shown in Figure 1.
 
-[[Image() widtht=500]]
+[[Image(menu.jpg, width=500)]]
 
-Select WiMAX and go to the "Profile Settings" and set it to match your configuration. For example:
+A. Select '''WiMAX''' and go to the "Profile Settings" on the sub-menu (should be the default page once you select WiMAX) and set it to match your configuration. For most sites it should looks something like this:
 
- 1. Home ID: '''44:51:db'''
+ 1. Home Operator ID: '''44:51:db'''
  1. Operator Name: '''GENI'''
  1. Operator Restrictions: '''none'''
- 1. Add the [wiki: list of frequencies and bandwidths for your site]
+ 1. Add the [wiki:WiMAX/00/01#a1.3.5GENIWiMAXSitesandContacts list of frequencies and bandwidths for your site]
+ 1. Enable Authentication: unchecked
 
-The filled-in page should look like the one shown in Figure 2.
+The filled-in page should look like the one shown in Figure 2 and 3.
 
-[[Image()]]
+[[Image(Profile1.jpg)]]
+[[Image(Profile2.jpg)]]
 
-The device is acutally [https://openwrt.org/ OpenWRT based gateway]; you can telnet into it with:
+Select '''Apply''' button in the upper right corner. 
+
+B. ('''optional but recommended''') Select the '''Operator List''' on the sub-menu and add newly created operator (for the operator from the example above it would be:
+ 1. Operator Name: '''44:51:db'''
+ 1. Operator Name: '''GENI'''
+ 1. Enable: checked
+and hit ''Add''' button (Figure 4). 
+
+[[Image(Operator.jpg)]]
+
+C. Reboot the gateway (the '''Reboot''' button should have appeared above the menu once you applied "Profile Settings"; otherwise go to '''System''' and select '''Restart''' ).
+
+The device is actually an [https://openwrt.org/ OpenWRT based gateway]; you can telnet into it with:
 
 - username: root
 - password: wimax-iad
-
-1. advanced settings
-1. wimax
-1. profile settings
- 1. set home ID, operator name, and set operator restriction to none
- 1. add list of frequencies and bandwidths
-1. operator list
- 1. add operator id and name
-1. apply
-1. restart