close
Warning:
Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.
- Timestamp:
-
Dec 8, 2010, 4:47:15 PM (13 years ago)
- Author:
-
hmussman
- Comment:
-
—
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v26
|
v27
|
|
1 | 1 | = 4. Software = |
2 | 2 | |
3 | | == NEC BTS == |
| 3 | == 4.1 NEC BTS == |
4 | 4 | |
5 | 5 | The NEC BTS comes with firmware that sets its function; it does not need to be installed. |
… |
… |
|
7 | 7 | However, that are many parameters that must be configured; see (reference below). |
8 | 8 | |
9 | | == ASN-GW Controller == |
| 9 | == 4.2 ASN-GW Controller == |
10 | 10 | |
11 | 11 | The ASN-GW controller code is provided by NEC, and is based upon their commercial code. |
… |
… |
|
34 | 34 | There ia an ASN-GW controller configuration file; see (reference below). |
35 | 35 | |
36 | | == Data Path Module == |
| 36 | == 4.3 Data Path Module == |
37 | 37 | |
38 | 38 | For Cases 1 and 2, the Data Path Module carries data between the NEC BTS and tbe GENI Access Network. |
… |
… |
|
44 | 44 | Later, it is expected that an Open FLow Switch will be supported. |
45 | 45 | |
46 | | === Click Modular Router === |
| 46 | === 4.3.1 Click Modular Router === |
47 | 47 | |
48 | 48 | The currently supported Data Path Module is the Click Modular Router, v1.6; later, this is planned to be replaced with v1.8. |
… |
… |
|
50 | 50 | The functionality of the CLICK Modular Router is set by its configuration file; see (reference below). This configuration file is initialzed and then updated by the Control Module. With the current v1.6 implementation, the CLICK moduler router must be restarted after the configuration file is updated. |
51 | 51 | |
52 | | === Open Flow Switch === |
53 | | |
54 | | == Control Module == |
| 52 | === 4.3.2 Open Flow Switch === |
| 53 | |
| 54 | == 4.4 Control Module == |
55 | 55 | |
56 | 56 | The Control Module controls the functionality of the NEC BTS, the ASN-GW Controller and the Data Path Module (e.g., CLICK Modular Router). |
… |
… |
|
60 | 60 | For Cases 2 and 3, the Control Module is the WiMAX RF Aggregate Manager. |
61 | 61 | |
62 | | === Simple Authorization Manager (SAM) === |
| 62 | === 4.4.1 Simple Authorization Manager (SAM) === |
63 | 63 | |
64 | 64 | The Simple Authorization Manager (SAM) provides configurations that set the functionality of the NEC IDU, the ASN-GW Controller and the Data Path Module (e.g., CLICK Modular Router). |
… |
… |
|
77 | 77 | |
78 | 78 | |
79 | | === WiMAX RF Aggregate Manager === |
| 79 | === 4.4.2 WiMAX RF Aggregate Manager === |
80 | 80 | |
81 | 81 | The WiMAX RF Agg Mgr provides configurations that set the functionality of the NEC IDU, the ASN-GW Controller and the Data Path Module (e.g., CLICK Modular Router). |
… |
… |
|
96 | 96 | The WiMAX RF Agg Mgr configures to the CLICK Modular Router to establish a path from the GRE tunnel to the Outside Access Network, and then restart the Router to begin the configuration. |
97 | 97 | |
98 | | == KVM Virtual Machines == |
99 | | |
100 | | |
101 | | == VM Aggregate Manager == |
102 | | |
103 | | === Accessibility === |
| 98 | |
| 99 | == 4.6 OMF/OML == |
| 100 | |
| 101 | |
| 102 | === 4.6.1 Aggregate Manager Services === |
| 103 | |
| 104 | |
| 105 | === 4.6.2 Experiment Control Services === |
| 106 | |
| 107 | |
| 108 | == 4.7 KVM Virtual Machines == |
| 109 | |
| 110 | |
| 111 | == 4.8 VM Aggregate Manager == |
| 112 | |
| 113 | === 4.8.1 Accessibility === |
104 | 114 | Running on: cons-wm-02 |
105 | 115 | Base URL: http://wm-asngw-02:5012/wimaxcl/ |
106 | 116 | |
107 | | === Functions supported === |
| 117 | === 4.8.2 Functions supported === |
108 | 118 | |
109 | 119 | {{{ |
… |
… |
|
133 | 143 | }}} |
134 | 144 | |
135 | | === Sample Queries and corresponding outputs === |
| 145 | === 4.8.3 Sample Queries and corresponding outputs === |
136 | 146 | |
137 | 147 | 1) To initialize the service. |