Errata/ Things we had to change but haven't formally committed to documentation

10/11/2010

We're going down the list of wiki:WiMAX/Software/Configuration and editing all the files accordingly.

• on the console machine (10.3.7.254 in this case), we edited /usr/share/asngw/classify-ctrl.sh, we changed the lines:
  Changed:

  : ${DEV_R3:="eth0"}
  : ${DEV_R6R4:="eth1"}
  : ${DEV_GREALL:="gre+"}
  : ${DEV_MSTUN:="mstun"}
  
  : ${MS2MS:="DROP"}
  : ${MS2MS_GRE_OPT:=""}
  : ${MS2MS_MSTUN_OPT:="-p icmp"}
  : ${MSMARK:="0x100"}
  
  : ${MSADDR:="10.41.0.0/16"}
  : ${R3_NETWORK:="10.41.0.0/16"}
  : ${R3_ADDR:="10.41.0.3"}  #jml
  : ${R6R4_NETWORK:="10.3.0.0/16"}
  : ${R6R4_ADDR:="10.3.7.1"}  # jml
  

• editing the asnctrl.conf
  Changed:

  R6_BSID[0] = 44:51:DB:00:07:01
  R6_BSAddress[0] = [10.3.7.1]:2231
  TunnelEndpoint = [10.3.7.254]:0
  

• editing the asnctrl_ASNGW000.conf
  Changed

  R4_BSID[0][0]=44:51:DB:00:07:01
  

• epctr.conf

  R3LocalDevice = eth0
  R4LocalDevice = eth1
  R6LocalDevice = eth1
  

---

We discovered an error in the wiset commands. Apparently the IP of the authgw_ip and associated flags needs to be set to the IP of the consoles eth1 intefaces (the one in the BS subnet). I had it incorrectly set to point to it self.

wiset authgw_ip 0x0A0307FE
wiset asngw_dp_ip 0x0A0307FE
wiset asngw_ep_ip 0x0A0307FE

Was run.

---

We copied SAMrb (cons-wm-01:/root/Oldhome/SAMrb_Oct7_2010.tar) from cons-wm-01 to the /root of the console and untarred it. We then installed rubygems and the open4 and orderedhash gems.

240  apt-get install rubygems
242  gem install open4
243  gem install orderedhash

From here we run the simple authmanager, it's interpreted by the ruby interpreter.

root@wimax:/root/SAMrb# ruby SimpleAuthManager.rb
Writting to a file
Started click PID=4633