Changes between Version 174 and Version 175 of Old/WiMAX/bOperations

Timestamp:

Jul 18, 2013, 2:32:58 PM (11 years ago)

Author:

agosain

Comment:

—

Old/WiMAX/bOperations

@@ -248 +248 @@
 === 1.4.1 Network setup and configuration ===
 
-A site will receive a console machine, which runs all the OMF aggregate manager services and three client resources. Two of these client resources will have a 12V power supply so that they can function as a mobile node, if needed. The third client will have a power supply so that it is fixed in its deployment. All services on the console machine will be configured to use the geni.net sub-domain and all IP addresses will be initially configured in the following scheme.
+A site will receive a console machine, which runs all the OMF aggregate manager services and three client resources. Two of these client resources will have a fixed power supply. The third client will have a 12 V power supply so that it can function as a mobile node. All services on the console machine will be configured to use the geni.net sub-domain and all IP addresses will be initially configured in the following scheme.
 
     * Data - 10.20.0.X/24
@@ -260 +260 @@
     3 switches, 1 partitioned switch, or single cable out. 
 
+Each site is asked to provide an Ubuntu 12.04 Host to run the Wimax-rf software. This requirement is based on the fact that most deployments are in remote locations or higher elevation locations so keeping the base station software closer to the base station is the motivation. This host will have 2 interfaces 
+
+* Public Internet Interface to communicate with the console machine.
+* Interface that connects to the base station or a switch connected to the base station.
 
 Setup networking as follows on the console host