WiMAX/17/11monitor

Monitoring and Maintenance Services

  1. 9. WiMAX RF Aggregate Manager Service
    1. Installation
    2. Configuration
  2. Wireless Control Services
    1. /driver - Base Station Driver services
    2. /mimo - MIMO Service
    3. /security - Security Parameters
    1. /wireless - Wireless Parameters
    1. /mobile - Mobile Control
  5. Error Correction Control Services
    1. /arq - ARQ Control
    2. /harq - HARQ Control
    1. /mpc - Measurement and Power Control
  7. Profile Control Services
    1. /dlprofile - Down Link Profile
    2. /ulprofile - Up Link Profile
    1. /mimo - MIMO Service
    1. /security - Security Parameters
  10. Monitoring and Maintenance Services
    1. /monitor - Monitor service parameter
    2. /maintenance - Maintenance Parameters
    3. /misc - Miscellaneous Parameters
  11. Basic Support Services
    1. /info - Configuration Info
    2. /status - Get Current Status
    3. /get - Get Basestation Parameter
    4. /set - Set Basestation Parameter
    5. /restart - Restart the Base Station
    6. /default - Reset to Default Parameters
    7. /restore - Restore Base Station Config
    8. Example usage of services from sandbox
  12. Client Control Services
    1. /addClient - Add client MAC address to ACL database
    2. /deleteClient - Delete client MAC address from ACL database
    3. /listClients - List clients registered in the ACL database
  13. RF Matrix Control Services

/monitor - Monitor service parameter

<service name="monitor">
      <info>Set MONITOR parameters</info>
      <args>
            <arg name="msgmax" isRequired="false" value="[msgmax]">
                  <info>Maximum monitoring data size. (0x0080)</info>
            </arg>
            <arg name="msgfile" isRequired="false" value="[msgfile]">
                  <info>Monitoring data type for local file monitoring (0x00)</info>
            </arg>
            <arg name="msgfilt" isRequired="false" value="[msgfilt]">
                  <info>Management message type to filter (0x43)</info>
            </arg>
      </args>
</service>

/maintenance - Maintenance Parameters

<service name="maintenance">
      <info>Set MAINTENANCE parameters</info>
      <args>
            <arg name="temphigh" isRequired="false" value="[temphigh]">
                  <info>@@@Text for temp_high@@@ (70)</info>
            </arg>
            <arg name="rssilow" isRequired="false" value="[rssilow]">
                  <info>Low threshold for generating the RSSI alarm (-440)</info>
            </arg>
            <arg name="temphirestore" isRequired="false" value="[temphirestore]">
                  <info>@@@Text for temp_high_restore@@@ (62)</info>
            </arg>
            <arg name="rssihigh" isRequired="false" value="[rssihigh]">
                  <info>High threshold for generating the RSSI alarm (-200)</info>
            </arg>
            <arg name="logicbsid" isRequired="false" value="[logicbsid]">
                  <info>Base Station ID (0x00000000)</info>
            </arg>
            <arg name="templow" isRequired="false" value="[templow]">
                  <info>@@@Text for temp_low@@@ (-5)</info>
            </arg>
            <arg name="alarmrst" isRequired="false" value="[alarmrst]">
                  <info>Alarm reset mode (0x01)</info>
            </arg>
            <arg name="templowrestore" isRequired="false" value="[templowrestore]">
                  <info>@@@Text for temp_low_restore@@@ (0)</info>
            </arg>
            <arg name="logseverity" isRequired="false" value="[logseverity]">
                  <info>Define event log level. (5)</info>
            </arg>
      </args>
</service>

/misc - Miscellaneous Parameters

mstp

This parameter indicates the threshold to reduce MS transmit power when UL-RSSI is too high.

  • mstp = -270 ---> -67.5 dBm
  • mstp = -200 ---> -50.0 dBm