AirSynergy 2000
Hardware Installation
AirSynergy Connections:
1. | Power | Connect power cable to -48 power supply with the provided cable; [Mean Well SP3XXX] |
|
2. | Networking | Insert SFP+ and connect; list of supported SFP+s |
|
3. | Serial Console (optional) | If needed for debugging |
|
Fully connected AirSynergy without weatherproofing covers should look like this:
Tested SFPs
Fiber connections were tested with:
Type | Manufacturer | Model
|
MMF | Intel | FTLX8571D3BCV-IT
|
SMF | Intel | FTLX1471D3BCV-IT
|
CAT5 (Copper Gigabit Ethernet
Manufacturer | Model | Note
|
Avago | abcu-5730arz | 1g (T)
|
Multi-mode Fiber
Manufacturer | Model | Note
|
Dell | ftlx8571d3bcl | 1g/10g (SR)
|
Finisar | ftlx8571bcv |
|
Intel | afbr-703sdz-in2 |
|
Iwnetworks | iw-trsfpl-sr |
|
Finisar | sfp-10gsr-85 |
|
Trendnet | teg-mgbsx |
|
Cisco | 1000base-sx |
|
Single-mode Fiber
Manufacturer | Model | Note
|
Dell | ftlx1471d3bcl |
|
Software Installation