close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 10 and Version 11 of Internal/WimaxGS2


Ignore:
Timestamp:
Apr 17, 2014, 10:05:44 PM (7 years ago)
Author:
msherman
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Internal/WimaxGS2

    v10 v11  
    77
    88=== GENI Configuration - '''No root''' method  ===
     9==== Shortcut Setup ====
     101. Download com.appdroid.anycut-1.apk​, attached to this article.
     111. On android phone, enable installation of third party applications, under System Settings -> Securtiy.
     121. Install com.appdroid.anycut-1.apk
     131. Open the new app, "Anycut"
     141. Choose "New shortcut"
     151. Choose "Activity", to create shortcuts to the following activities. You will need to repeat steps 4-6 for each one.
     16 1. wimaxhiddenmenu
     17 1. WIMAX_CFG (First of two entries)
    918
    10 - Install anycut app, to create shortcut to activities. APK is attached to this article.
     19==== Wimax Settings ====
    1120
    12 - Make shortcut to wimaxhiddenmenu
     211. Turn Wimax on, Under System Settings -> 4G Settings
     221. Open WIMAX_CFG
     231. Select NAP-ID
     241. Long press the first entry
     25 1. Choose Write Napid
     26 1. Enter 4451db
     27 1. Press Save
     281. Long press the entry again
     29 1. Choose Write Priority
     30 1. Enter 1
     31 1. Press Save
     321. Return to the home screen
     331. Open !WimaxHiddenMenu
     341. Press Open Device
     351. TO ENSURE THAT ONLY SELECTED FREQUENCIES ARE USED: Select "0" for "Best FA update option". Then press Set.
     361. For each of the following, enter the value, and then press "Set"
     37 1. FA Index![0]: Set to desired center frequency.
     38 1. BW![0]: Set to desired Bandwidth, a value of "6" means 10mhz.
     39 1. FA Index![1]: Set to second desired center frequency.
     40 1. BW![1]: Set to second desired Bandwidth, a value of "6" means 10mhz.
     41 1. FA Index![2]: Set to third desired center frequency.
     42 1. BW![2]: Set to third desired Bandwidth, a value of "6" means 10mhz.
     431. IF FEWER THAN 3 FREQUENCIES DESIRED:
     44 - Follow above instructions, setting extras to 0.
    1345
    14 - make shortcut to first entry of wimax_cfg
    15 
    16 - in wimax_cfg, set first NAPID to value: 4451db, and priority 1
    17 
    18 - in wimax hidden menu:
    19 1. open device
    20 1. FA Index![0]: Set to desired frequency, then press "Set"
    21 1. BW![0]: Set to desired Bandwidth, 6-> 10mhz, unsure of values of 5, and 0., then press "Set"
    22 1. FA Index![1]: Set to second desired frequency, then press "Set"
    23 1. BW![1]: Set to second desired Bandwidth, 6-> 10mhz, unsure of values of 5, and 0., then press "Set"
    24 1. FA Index![2]: Set to third desired frequency, then press "Set"
    25 1. BW![2]: Set to third desired Bandwidth, 6-> 10mhz, unsure of values of 5, and 0., then press "Set"
    26 1. IF FEWER THAN 3 FREQUENCIES DESIRED: follow above instructions, setting extras to 0.
    27 1. TO ENSURE THAT ONLY SELECTED FREQUENCIES ARE USED: Set "Best FA update option" to 0. Then press Set.
     46The phone should now connect to your Wimax basestation upon pressing scan, under 4g settings, or on startup of the phone's wimax radio. These settings persist through reboot. If settings incorrect, you can always return to the phone's default settings by choosing "Load Default" under !WimaxHiddenMenu. Afterwards, you will need to follow the steps under "Wimax Settings" again.
    2847
    2948== Virgin Mobile ==