Changes between Version 10 and Version 11 of Internal/WimaxRG231

Timestamp:

Apr 23, 2014, 7:23:58 PM (10 years ago)

Author:

seskar

Comment:

—

Internal/WimaxRG231

@@ -3 +3 @@
 [[TOC(Internal/*)]]
 
-The manual for this device is in the [attachment:'MiMAX-Easy (RG231)_User_Guide.pdf' attachment]
+Please make sure that you have the [attachment:MiMAX-Pro_AWB_RG231_81-1.0.3.2-5.2.7.3.zip latest firmware] installed before configuring the device; the firmware upgrade procedure is described in the [attachment:'MiMAX-Easy (RG231)_User_Guide.pdf' user guide]. 
 
-Please make sure that you have the [attachment:MiMAX-Pro_AWB_RG231_81-1.0.3.2-5.2.7.3.zip latest firmware].
+== GENI Configuration ==
 
-== Initial Setup ==
-to login properly: (Case is Important!)
+The device needs custom WiMAX configuration that is not described in the manual. In order to get to the set of pages for WiMAX configuration log in with ('''case is important'''):
 
 - username: Operator
-- pass:     oper1234
+- password: oper1234
+
+You should now get extended menu under the '''Advanced Settings''' as shown in Figure 1.
+
+[[Image() widtht=500]]
+
+Select WiMAX and go to the "Profile Settings" and set it to match your configuration. For example:
+
+ 1. Home ID: '''44:51:db'''
+ 1. Operator Name: '''GENI'''
+ 1. Operator Restrictions: '''none'''
+ 1. Add the [wiki: list of frequencies and bandwidths for your site]
+
+The filled-in page should look like the one shown in Figure 2.
+
+[[Image()]]
+
+The device is acutally [https://openwrt.org/ OpenWRT based gateway]; you can telnet into it with:
+
+- username: root
+- password: wimax-iad
 
 1. advanced settings
@@ -22 +41 @@
 1. apply
 1. restart
-
-to change internal settings:
-1. open a telnet session
-1. login with root / wimax-iad