= MiMAX Pro RG231 (Indoor Gateway) =

[[TOC(Internal/*)]]

Please make sure that you have the [attachment:MiMAX-Pro_AWB_RG231_81-1.0.3.2-5.2.7.3.zip latest firmware] installed before configuring the device; the firmware upgrade procedure is described in the [attachment:'MiMAX-Easy (RG231)_User_Guide.pdf' user guide]. 

== GENI Configuration ==

The device needs custom WiMAX configuration that is not described in the manual. In order to get to the set of pages for WiMAX configuration log in with ('''case is important'''):

- username: Operator
- password: oper1234

You should now get extended menu that includes '''WiMAX''' menu button once you switch to '''Advanced Settings''' mode as shown in Figure 1.

[[Image(menu.jpg, width=500)]]

A. Select '''WiMAX''' and go to the "Profile Settings" on the sub-menu (should be the default page once you select WiMAX) and set it to match your configuration. For most sites it should looks something like this:

 1. Home Operator ID: '''44:51:db'''
 1. Operator Name: '''GENI'''
 1. Operator Restrictions: '''none'''
 1. Add the [wiki:WiMAX/00/01#a1.3.5GENIWiMAXSitesandContacts list of frequencies and bandwidths for your site]
 1. Enable Authentication: unchecked

The filled-in page should look like the one shown in Figure 2 and 3.

[[Image(Profile1.jpg)]]
[[Image(Profile2.jpg)]]

Select '''Apply''' button in the upper right corner. 

B. ('''optional but recommended''') Select the '''Operator List''' on the sub-menu and add newly created operator (for the operator from the example above it would be:
 1. Operator Name: '''44:51:db'''
 1. Operator Name: '''GENI'''
 1. Enable: checked
and hit ''Add''' button (Figure 4). 

[[Image(Operator.jpg)]]

C. Reboot the gateway (the '''Reboot''' button should have appeared above the menu once you applied "Profile Settings"; otherwise go to '''System''' and select '''Restart''' ).

The device is actually an [https://openwrt.org/ OpenWRT based gateway]; you can telnet into it with:

- username: root
- password: wimax-iad