close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 55 and Version 56 of Old/WiMAX/02


Ignore:
Timestamp:
Oct 17, 2013, 10:24:30 AM (9 years ago)
Author:
davide
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Old/WiMAX/02

    v55 v56  
    8282=== 4.3.1  Click Modular Router ===
    8383
    84 The currently supported Data Path Module is the Click Modular Router, v1.6;  later, this is planned to be replaced with v1.8.
    85 
    86 The functionality of the CLICK Modular Router is based on a dynamically configurable L2 learning switch, and its configuration is shown in Fig 5.
     84The currently supported Data Path Module is the Click Modular Router, v1.6;  later, this is planned to be replaced with v2.x.
     85
     86The functionality of the Click Modular Router is based on a dynamically configurable L2 learning switch, and its configuration is shown in Fig 5.
    8787
    8888
     
    101101 * ARP Requests from GENI Access Network: handled by ARP manager
    102102
    103 Data paths are setup by the CLICK configuration file;  see (reference below).  This configuration file is initialized by the Control Module, and then updated whenever data flows are added or deleted.  With the current v1.6 implementation, the CLICK modular router must be restarted after the configuration file is updated.
     103Data paths are setup by the Click configuration file;  see (reference below).  This configuration file is initialized by the Control Module, and then updated whenever data flows are added or deleted.  With the current v1.6 implementation, the Click modular router must be restarted after the configuration file is updated. This will not be necessary with Click 2.x.
    104104
    105105=== 4.3.2  Open Flow Switch ===
     
    116116== 4.4  Control Module ==
    117117
    118 The Control Module talks to the NEC BTS, the ASN-GW Controller and the Data Path Module (e.g., CLICK Modular Router).
     118The Control Module talks to the NEC BTS, the ASN-GW Controller and the Data Path Module (e.g., Click Modular Router).
    119119
    120120For Case 1, the Control Module is the Simple Authorization Manager (SAM).
     
    151151=== 4.4.2  WiMAX RF Aggregate Manager ===
    152152
    153 For Cases 2 and 3, the WiMAX RF Agg Mgr replaces the SAM and talks to the NEC IDU, the ASN-GW Controller and the Data Path Module (e.g., CLICK Modular Router). 
     153For Cases 2 and 3, the WiMAX RF Agg Mgr replaces the SAM and talks to the NEC IDU, the ASN-GW Controller and the Data Path Module (e.g., Click Modular Router). 
    154154
    155155The WiMAX RF Agg Mgr deals with these parameters:  MS MAC address;  gre tunnel identifier;  VLAN tag number.