Changes between Version 10 and Version 11 of Old/WiMAX/05/01

Timestamp:

Dec 9, 2010, 7:09:55 PM (13 years ago)

Author:

hmussman

Comment:

—

Old/WiMAX/05/01

@@ -337 +337 @@
 (sample)
 
-
-== 6.7 Operations and Testing ==
-
-
-=== 6.7.1 Login to Base Station Server ===
+== 6.7  OMF/OML Installation ==
+
+
+
+== 6.8  OMF/OML COnfiguration ==
+
+
+
+== 6.9 Operations and Testing ==
+
+
+=== 6.9.1 Login to Base Station Server ===
 
 Login through the console on the Base Station Server (ASN-GW) and test the following.
@@ -364 +371 @@
 
 
-=== 6.7.2  Login to BTS ===
+=== 6.9.2  Login to BTS ===
 
  1.  To login:  
@@ -380 +387 @@
 
 
-=== 6.7.3  ASN GW Operation ===
+=== 6.9.3  ASN GW Operation ===
 
 
@@ -423 +430 @@
 
 
-=== 6.7.4 RF Transmission ===
+=== 6.9.4 RF Transmission ===
 
 1. Scan on the client and check if the basestation's signal is seen using the procedure described below. If we are able to connect step 2 can be ignored. Else try step 2.
@@ -439 +446 @@
    - Vary transmit power at the BTS using wiset calls on the BTS or through the web interface and then measure the corresponding changes on the analyzer.
 
-=== 6.7.5 SAM Monitoring ===
-
-
-=== 6.7.6 CLICK Modular Router Monitoring ===
-
-
-=== 6.7.7  Mobile Station Registration ===
-
-
-=== 6.7.8  Traffic Monitoring ===
+=== 6.9.5 SAM Monitoring ===
+
+
+=== 6.9.6 CLICK Modular Router Monitoring ===
+
+
+=== 6.9.7  Mobile Station Registration ===
+
+
+=== 6.9.8  Traffic Monitoring ===
+
+
+=== 6.9.9  Login to OMF as Experimenter ===
+
+
+=== 6.9.10  Use of OMF to Configure Service ===
+
+
+=== 6.9.11  Use of OML to Monitor BTS ===
+
+
+=== 6.9.12  Use of OML to Monitor Service ===
+
+
+=== 6.9.13  Use of OML ===
 
 Install wireshark on ethernet interfaces.