close
Warning:
Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.
- Timestamp:
-
Nov 18, 2011, 12:23:55 AM (12 years ago)
- Author:
-
ffund01
- Comment:
-
—
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v9
|
v10
|
|
310 | 310 | |
311 | 311 | === rtg === |
| 312 | |
312 | 313 | Receive Transmit Transition Gap (RTG value) in units of PS (physical slots). This is the gap between the uplink burst and the subsequent downlink burst in a TDD transceiver. During RTG, the BS switches from receive to transmit mode and SSs switch from transmit to receive mode. The recommended value depends on the bandwidth mode (bwmode) setting, as follows: |
313 | 314 | |
… |
… |
|
317 | 318 | || 168 || 10 MHz (0) || |
318 | 319 | |
319 | | |
320 | | |
| 320 | === permutation === |
| 321 | |
| 322 | Two permutation modes are allowed: |
| 323 | |
| 324 | 0 --> PUSC (partial usage of subchannels) |
| 325 | 1 --> FUSC (full use of subchannels) |
| 326 | |
| 327 | Other settings (e.g. ttg) may need to be changed if you change permutation mode. |
| 328 | N.B. HARQ can only be enabled if the permutation mode is PUSC! |
| 329 | |