62 | | <info> |
63 | | Set HARQ parameters</info> |
64 | | <args> |
65 | | <arg name=dldelay isRequired=false> |
66 | | <info> |
67 | | Frame offset of DL ACK delay wrt to DL Burst [1,2,3] (1)</info> |
68 | | </arg> |
69 | | <arg name=mimoul isRequired=false> |
70 | | <info> |
71 | | MIMO HARQ support: true/false (IGNORED - mimo support not available for this BS)</info> |
72 | | </arg> |
73 | | <arg name=pdusn isRequired=false> |
74 | | <info> |
75 | | PDU SN extended subheader reordering enabled: true/false (true)</info> |
76 | | </arg> |
77 | | <arg name=mret isRequired=false> |
78 | | <info> |
79 | | Maximum number of retransmissions [0..255] (4)</info> |
80 | | </arg> |
81 | | <arg name=burst isRequired=false> |
82 | | <info> |
83 | | Maximum number of HARQ bursts per frame [0..255] (17)</info> |
84 | | </arg> |
85 | | <arg name=enable isRequired=false> |
86 | | <info> |
87 | | Enable HARQ: true/false (false)</info> |
88 | | </arg> |
89 | | <arg name=uldelay isRequired=false> |
90 | | <info> |
91 | | Frame offset of UL ACK delay wrt to UL Burst [2,3] (3)</info> |
92 | | </arg> |
93 | | </args> |
| 60 | <info> |
| 61 | Set HARQ parameters</info> |
| 62 | <args> |
| 63 | <arg name=dldelay isRequired=false> |
| 64 | <info> |
| 65 | Frame offset of DL ACK delay wrt to DL Burst [1,2,3] (1)</info> |
| 66 | </arg> |
| 67 | <arg name=mimoul isRequired=false> |
| 68 | <info> |
| 69 | MIMO HARQ support: true/false (IGNORED - mimo support not available for this BS)</info> |
| 70 | </arg> |
| 71 | <arg name=pdusn isRequired=false> |
| 72 | <info> |
| 73 | PDU SN extended subheader reordering enabled: true/false (true)</info> |
| 74 | </arg> |
| 75 | <arg name=mret isRequired=false> |
| 76 | <info> |
| 77 | Maximum number of retransmissions [0..255] (4)</info> |
| 78 | </arg> |
| 79 | <arg name=burst isRequired=false> |
| 80 | <info> |
| 81 | Maximum number of HARQ bursts per frame [0..255] (17)</info> |
| 82 | </arg> |
| 83 | <arg name=enable isRequired=false> |
| 84 | <info> |
| 85 | Enable HARQ: true/false (false)</info> |
| 86 | </arg> |
| 87 | <arg name=uldelay isRequired=false> |
| 88 | <info> |
| 89 | Frame offset of UL ACK delay wrt to UL Burst [2,3] (3)</info> |
| 90 | </arg> |
| 91 | </args> |
174 | | <info> |
175 | | Set down link modulation scheme</info> |
176 | | <args> |
177 | | <arg name=dlprof8 isRequired=false> |
178 | | <info> |
179 | | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 5/6 (21))</info> |
180 | | </arg> |
181 | | <arg name=dlprof3 isRequired=false> |
182 | | <info> |
183 | | DL FEC code and modulation type of each burst profile on DCD message. (16-QAM (CTC) 1/2 (16))</info> |
184 | | </arg> |
185 | | <arg name=dlprof9 isRequired=false> |
186 | | <info> |
187 | | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
188 | | </arg> |
189 | | <arg name=dlprof4 isRequired=false> |
190 | | <info> |
191 | | DL FEC code and modulation type of each burst profile on DCD message. (16-QAM (CTC) 3/4 (17))</info> |
192 | | </arg> |
193 | | <arg name=dlprof10 isRequired=false> |
194 | | <info> |
195 | | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
196 | | </arg> |
197 | | <arg name=dlprof5 isRequired=false> |
198 | | <info> |
199 | | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 1/2 (18))</info> |
200 | | </arg> |
201 | | <arg name=dlprof11 isRequired=false> |
202 | | <info> |
203 | | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
204 | | </arg> |
205 | | <arg name=dlprof6 isRequired=false> |
206 | | <info> |
207 | | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 2/3 (19))</info> |
208 | | </arg> |
209 | | <arg name=dlprof1 isRequired=false> |
210 | | <info> |
211 | | DL FEC code and modulation type of each burst profile on DCD message. (QPSK (CTC) 1/2 (13))</info> |
212 | | </arg> |
213 | | <arg name=dlprof12 isRequired=false> |
214 | | <info> |
215 | | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
216 | | </arg> |
217 | | <arg name=dlprof7 isRequired=false> |
218 | | <info> |
219 | | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 3/4 (20))</info> |
220 | | </arg> |
221 | | <arg name=dlprof2 isRequired=false> |
222 | | <info> |
223 | | DL FEC code and modulation type of each burst profile on DCD message. (QPSK (CTC) 3/4 (15))</info> |
224 | | </arg> |
225 | | </args> |
| 171 | <info> |
| 172 | Set down link modulation scheme</info> |
| 173 | <args> |
| 174 | <arg name=dlprof8 isRequired=false> |
| 175 | <info> |
| 176 | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 5/6 (21))</info> |
| 177 | </arg> |
| 178 | <arg name=dlprof3 isRequired=false> |
| 179 | <info> |
| 180 | DL FEC code and modulation type of each burst profile on DCD message. (16-QAM (CTC) 1/2 (16))</info> |
| 181 | </arg> |
| 182 | <arg name=dlprof9 isRequired=false> |
| 183 | <info> |
| 184 | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
| 185 | </arg> |
| 186 | <arg name=dlprof4 isRequired=false> |
| 187 | <info> |
| 188 | DL FEC code and modulation type of each burst profile on DCD message. (16-QAM (CTC) 3/4 (17))</info> |
| 189 | </arg> |
| 190 | <arg name=dlprof10 isRequired=false> |
| 191 | <info> |
| 192 | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
| 193 | </arg> |
| 194 | <arg name=dlprof5 isRequired=false> |
| 195 | <info> |
| 196 | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 1/2 (18))</info> |
| 197 | </arg> |
| 198 | <arg name=dlprof11 isRequired=false> |
| 199 | <info> |
| 200 | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
| 201 | </arg> |
| 202 | <arg name=dlprof6 isRequired=false> |
| 203 | <info> |
| 204 | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 2/3 (19))</info> |
| 205 | </arg> |
| 206 | <arg name=dlprof1 isRequired=false> |
| 207 | <info> |
| 208 | DL FEC code and modulation type of each burst profile on DCD message. (QPSK (CTC) 1/2 (13))</info> |
| 209 | </arg> |
| 210 | <arg name=dlprof12 isRequired=false> |
| 211 | <info> |
| 212 | DL FEC code and modulation type of each burst profile on DCD message. (No Modulation (255))</info> |
| 213 | </arg> |
| 214 | <arg name=dlprof7 isRequired=false> |
| 215 | <info> |
| 216 | DL FEC code and modulation type of each burst profile on DCD message. (64-QAM (CTC) 3/4 (20))</info> |
| 217 | </arg> |
| 218 | <arg name=dlprof2 isRequired=false> |
| 219 | <info> |
| 220 | DL FEC code and modulation type of each burst profile on DCD message. (QPSK (CTC) 3/4 (15))</info> |
| 221 | </arg> |
| 222 | </args> |
232 | | <info> |
233 | | Set up link modulation scheme</info> |
234 | | <args> |
235 | | <arg name=ulprof6 isRequired=false> |
236 | | <info> |
237 | | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
238 | | </arg> |
239 | | <arg name=ulprof1 isRequired=false> |
240 | | <info> |
241 | | UL FEC code and modulation type of each burst profile on UCD message. (QPSK (CTC) 1/2 (13))</info> |
242 | | </arg> |
243 | | <arg name=ulprof7 isRequired=false> |
244 | | <info> |
245 | | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
246 | | </arg> |
247 | | <arg name=ulprof2 isRequired=false> |
248 | | <info> |
249 | | UL FEC code and modulation type of each burst profile on UCD message. (QPSK (CTC) 3/4 (15))</info> |
250 | | </arg> |
251 | | <arg name=ulprof8 isRequired=false> |
252 | | <info> |
253 | | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
254 | | </arg> |
255 | | <arg name=ulprof3 isRequired=false> |
256 | | <info> |
257 | | UL FEC code and modulation type of each burst profile on UCD message. (16-QAM (CTC) 1/2 (16))</info> |
258 | | </arg> |
259 | | <arg name=ulprof9 isRequired=false> |
260 | | <info> |
261 | | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
262 | | </arg> |
263 | | <arg name=ulprof4 isRequired=false> |
264 | | <info> |
265 | | UL FEC code and modulation type of each burst profile on UCD message. (16-QAM (CTC) 3/4 (17))</info> |
266 | | </arg> |
267 | | <arg name=ulprof10 isRequired=false> |
268 | | <info> |
269 | | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
270 | | </arg> |
271 | | <arg name=ulprof5 isRequired=false> |
272 | | <info> |
273 | | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
274 | | </arg> |
275 | | </args> |
| 229 | <info> |
| 230 | Set up link modulation scheme</info> |
| 231 | <args> |
| 232 | <arg name=ulprof6 isRequired=false> |
| 233 | <info> |
| 234 | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
| 235 | </arg> |
| 236 | <arg name=ulprof1 isRequired=false> |
| 237 | <info> |
| 238 | UL FEC code and modulation type of each burst profile on UCD message. (QPSK (CTC) 1/2 (13))</info> |
| 239 | </arg> |
| 240 | <arg name=ulprof7 isRequired=false> |
| 241 | <info> |
| 242 | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
| 243 | </arg> |
| 244 | <arg name=ulprof2 isRequired=false> |
| 245 | <info> |
| 246 | UL FEC code and modulation type of each burst profile on UCD message. (QPSK (CTC) 3/4 (15))</info> |
| 247 | </arg> |
| 248 | <arg name=ulprof8 isRequired=false> |
| 249 | <info> |
| 250 | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
| 251 | </arg> |
| 252 | <arg name=ulprof3 isRequired=false> |
| 253 | <info> |
| 254 | UL FEC code and modulation type of each burst profile on UCD message. (16-QAM (CTC) 1/2 (16))</info> |
| 255 | </arg> |
| 256 | <arg name=ulprof9 isRequired=false> |
| 257 | <info> |
| 258 | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
| 259 | </arg> |
| 260 | <arg name=ulprof4 isRequired=false> |
| 261 | <info> |
| 262 | UL FEC code and modulation type of each burst profile on UCD message. (16-QAM (CTC) 3/4 (17))</info> |
| 263 | </arg> |
| 264 | <arg name=ulprof10 isRequired=false> |
| 265 | <info> |
| 266 | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
| 267 | </arg> |
| 268 | <arg name=ulprof5 isRequired=false> |
| 269 | <info> |
| 270 | UL FEC code and modulation type of each burst profile on UCD message. (No Modulation (255))</info> |
| 271 | </arg> |
| 272 | </args> |
298 | | <info>Get status of WiMAX RF service</info> |
| 294 | <info>Set DRIVER BASE parameters</info> |
| 295 | <args><arg name="blockadmin" isRequired="false"> |
| 296 | <info>Block admin on/off (0)</info> |
| 297 | </arg> |
| 298 | <arg name="pack" isRequired="false"> |
| 299 | <info>Enable packing mode (0)</info> |
| 300 | </arg> |
| 301 | <arg name="carrieradmin" isRequired="false"> |
| 302 | <info>Carrier admin on/off (1)</info> |
| 303 | </arg> |
| 304 | <arg name="maxservflow" isRequired="false"> |
| 305 | <info>Maxnumber of service flow (600)</info> |
| 306 | </arg> |
| 307 | <arg name="crc" isRequired="false"> |
| 308 | <info>Enable crc mode (1)</info> |
| 309 | </arg> |
| 310 | <arg name="fragmt" isRequired="false"> |
| 311 | <info>Fragmenting on/off (0)</info> |
| 312 | </arg> |
| 313 | <arg name="maxClients" isRequired="false"> |
| 314 | <info>Max number of clients (96)</info> |
| 315 | </arg> |
| 316 | </args> |
305 | | <info> |
306 | | Set MAINTENANCE parameters</info> |
307 | | <args> |
308 | | <arg name=logseverity isRequired=false> |
309 | | <info> |
310 | | Define event log level. (5)</info> |
311 | | </arg> |
312 | | <arg name=temphigh isRequired=false> |
313 | | <info> |
314 | | @@@Text for temp_high@@@ (70)</info> |
315 | | </arg> |
316 | | <arg name=rssilow isRequired=false> |
317 | | <info> |
318 | | Low threshold for generating the RSSI alarm (-440)</info> |
319 | | </arg> |
320 | | <arg name=temphirestore isRequired=false> |
321 | | <info> |
322 | | @@@Text for temp_high_restore@@@ (62)</info> |
323 | | </arg> |
324 | | <arg name=rssihigh isRequired=false> |
325 | | <info> |
326 | | High threshold for generating the RSSI alarm (-200)</info> |
327 | | </arg> |
328 | | <arg name=logicbsid isRequired=false> |
329 | | <info> |
330 | | Base Station ID (0x00000000)</info> |
331 | | </arg> |
332 | | <arg name=templow isRequired=false> |
333 | | <info> |
334 | | @@@Text for temp_low@@@ (-5)</info> |
335 | | </arg> |
336 | | <arg name=alarmrst isRequired=false> |
337 | | <info> |
338 | | Alarm reset mode (0x01)</info> |
339 | | </arg> |
340 | | <arg name=templowrestore isRequired=false> |
341 | | <info> |
342 | | @@@Text for temp_low_restore@@@ (0)</info> |
343 | | </arg> |
344 | | </args> |
345 | | </service> |
346 | | }}} |
347 | | |
348 | | == bs/mimo - ???== |
349 | | {{{ |
350 | | <service name=bs/maintenance> |
351 | | <info> |
352 | | Set MAINTENANCE parameters</info> |
353 | | <args> |
354 | | <arg name=logseverity isRequired=false> |
355 | | <info> |
356 | | Define event log level. (5)</info> |
357 | | </arg> |
358 | | <arg name=temphigh isRequired=false> |
359 | | <info> |
360 | | @@@Text for temp_high@@@ (70)</info> |
361 | | </arg> |
362 | | <arg name=rssilow isRequired=false> |
363 | | <info> |
364 | | Low threshold for generating the RSSI alarm (-440)</info> |
365 | | </arg> |
366 | | <arg name=temphirestore isRequired=false> |
367 | | <info> |
368 | | @@@Text for temp_high_restore@@@ (62)</info> |
369 | | </arg> |
370 | | <arg name=rssihigh isRequired=false> |
371 | | <info> |
372 | | High threshold for generating the RSSI alarm (-200)</info> |
373 | | </arg> |
374 | | <arg name=logicbsid isRequired=false> |
375 | | <info> |
376 | | Base Station ID (0x00000000)</info> |
377 | | </arg> |
378 | | <arg name=templow isRequired=false> |
379 | | <info> |
380 | | @@@Text for temp_low@@@ (-5)</info> |
381 | | </arg> |
382 | | <arg name=alarmrst isRequired=false> |
383 | | <info> |
384 | | Alarm reset mode (0x01)</info> |
385 | | </arg> |
386 | | <arg name=templowrestore isRequired=false> |
387 | | <info> |
388 | | @@@Text for temp_low_restore@@@ (0)</info> |
389 | | </arg> |
390 | | </args> |
| 323 | <info> |
| 324 | Set MAINTENANCE parameters</info> |
| 325 | <args> |
| 326 | <arg name=logseverity isRequired=false> |
| 327 | <info> |
| 328 | Define event log level. (5)</info> |
| 329 | </arg> |
| 330 | <arg name=temphigh isRequired=false> |
| 331 | <info> |
| 332 | @@@Text for temp_high@@@ (70)</info> |
| 333 | </arg> |
| 334 | <arg name=rssilow isRequired=false> |
| 335 | <info> |
| 336 | Low threshold for generating the RSSI alarm (-440)</info> |
| 337 | </arg> |
| 338 | <arg name=temphirestore isRequired=false> |
| 339 | <info> |
| 340 | @@@Text for temp_high_restore@@@ (62)</info> |
| 341 | </arg> |
| 342 | <arg name=rssihigh isRequired=false> |
| 343 | <info> |
| 344 | High threshold for generating the RSSI alarm (-200)</info> |
| 345 | </arg> |
| 346 | <arg name=logicbsid isRequired=false> |
| 347 | <info> |
| 348 | Base Station ID (0x00000000)</info> |
| 349 | </arg> |
| 350 | <arg name=templow isRequired=false> |
| 351 | <info> |
| 352 | @@@Text for temp_low@@@ (-5)</info> |
| 353 | </arg> |
| 354 | <arg name=alarmrst isRequired=false> |
| 355 | <info> |
| 356 | Alarm reset mode (0x01)</info> |
| 357 | </arg> |
| 358 | <arg name=templowrestore isRequired=false> |
| 359 | <info> |
| 360 | @@@Text for temp_low_restore@@@ (0)</info> |
| 361 | </arg> |
| 362 | </args> |
| 363 | </service> |
| 364 | }}} |
| 365 | |
| 366 | == bs/mimo - MIMO parameters == |
| 367 | {{{ |
| 368 | <service name="bs/mimo"> |
| 369 | <info>Set MIMO parameters</info> |
| 370 | <args> |
| 371 | <arg name="mimoul" isRequired="false"> |
| 372 | <info>@@@Text for mimo_ul@@@ (0)</info> |
| 373 | </arg> |
| 374 | <arg name="mimo" isRequired="false"> |
| 375 | <info>MIMO on/off (0)</info> |
| 376 | </arg> |
| 377 | <arg name="mimomatrix" isRequired="false"> |
| 378 | <info>Preferred MIMO matrix - Matrix A. (0)</info> |
| 379 | </arg> |
| 380 | </args> |
607 | | <info> |
608 | | Set MONITOR parameters</info> |
609 | | <args> |
610 | | <arg name=msgmax isRequired=false> |
611 | | <info> |
612 | | Maximum monitoring data size. (0x0080)</info> |
613 | | </arg> |
614 | | <arg name=msgfile isRequired=false> |
615 | | <info> |
616 | | Monitoring data type for local file monitoring (0x00)</info> |
617 | | </arg> |
618 | | <arg name=msgfilt isRequired=false> |
619 | | <info> |
620 | | Management message type to filter (0x43)</info> |
621 | | </arg> |
622 | | </args> |
623 | | </service> |
624 | | }}} |
625 | | |
626 | | == bs/mpc - ???== |
| 597 | <info> |
| 598 | Set MONITOR parameters</info> |
| 599 | <args> |
| 600 | <arg name=msgmax isRequired=false> |
| 601 | <info> |
| 602 | Maximum monitoring data size. (0x0080)</info> |
| 603 | </arg> |
| 604 | <arg name=msgfile isRequired=false> |
| 605 | <info> |
| 606 | Monitoring data type for local file monitoring (0x00)</info> |
| 607 | </arg> |
| 608 | <arg name=msgfilt isRequired=false> |
| 609 | <info> |
| 610 | Management message type to filter (0x43)</info> |
| 611 | </arg> |
| 612 | </args> |
| 613 | </service> |
| 614 | }}} |
| 615 | |
| 616 | == bs/mpc - ??? == |