= Basic Support Services =
= REVAMP THIS PAGE 6/22/2012 NP =
[[TOC(WiMAX/17*, depth=2, heading=WiMAX RF Aggregate Manager)]]
== /info - Configuration Info ==
Get the information about configuration parameters of the Base Station
{{{
Get information about the Base Station
}}}
== /status - Get Current Status ==
{{{
Get status of WiMAX RF service
}}}
== /get - Get Basestation Parameter ==
{{{
Get Basestation Static Parameter
}}}
== /set - Set Basestation Parameter ==
{{{
Set Basestation Static Parameter
}}}
== /restart - Restart the Base Station ==
{{{
Restart the Base Station
}}}
== /default - Reset to Default Parameters ==
{{{
Restore Base Station parameters from default configuration
}}}
== /restore - Restore Base Station Config ==
{{{
Restore Base Station parameters from saved configuration
service name="uploadr"/>
}}}
== Example usage of services from sandbox ==
To reset base station's datapath configuration back to defaults:
{{{
$ wget -O status http://cons-wm-01:5052/wimaxrf/datapath/clean
$ wget -O status http://cons-wm-01:5052/wimaxrf/datapath/config/load?name=defaults
}}}
To view all clients loaded under current datapath configuration:
{{{
$ wget -O status http://cons-wm-01:5052/wimaxrf/datapath/clients/status
}}}
To reset base station's configuration back to defaults:
{{{
$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/config/load?name=defaults
}}}
To restart base station:
{{{
$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/restart
}}}