= Datapath Control Services = [[TOC(WiMAX/17*, depth=2, heading=WiMAX RF Aggregate Manager)]] == datapath/config/list - Displays list of ACL (Access control list) profiles == == datapath/config/load - Loads an ACL profile from database == == datapath/config/save - Saves current ACL as a profile in database == == datapath/config/delete - Removes ACL profile from database == == datapath/config/show - Displays content of an ACL profile == == datapath/client/add - Adds client MAC address to ACL == Add client with given MAC address to the list of authorized clients and specify the slice to which it belongs. Optionally provide IP address. Depending on the policy setting in the configuration, unauthorized clients will be refused access. {{{ Add client with specified MAC address to BS access list IP address for the client MAC address of the client VLAN ID (slice) that the client belongs to }}} Example usage: {{{ http://cons-mw-01:5052/wimaxrf/addClient?macaddr=00:1d:e1:37:11:04&vlanid=1&ipaddress=10.41.18.2 }}} == datapath/client/delete - Delete client MAC address from ACL (Access control list) == == datapath/client/modify - Displays list of authorized client profiles == == datapath/client/status - Displays current ACL configuration == == /deleteClient - database == Removes client with specified macaddr from authorization list. {{{ Delete client with specified MAC address from BS access list MAC address of the client }}} Example usage: {{{ http://localhost:5052/wimaxrf/deleteClient?macaddr=00:1d:e1:36:ff:0a }}} == /listClients - List clients registered in the ACL database == Display the list of authorized clients. {{{ List clients... }}} Example usage: {{{ http://localhost:5052/wimaxrf/listClients }}} = RF Matrix Control Services = 1. set - to set attenuation on given ports pair (example portA=1 , portB=2 attenuation = 20) {{{ $ wget -O status http://localhost:5052/instr/set?portA=1\&portB=2\&att=20 }}} 2.get - to get attenuation on given pair of ports {{{ $ wget -O status http://localhost:5052/instr/get?portA=1\&portB=8 }}} 3.status - to get attenuation on all port pairs {{{ $ wget -O status http://localhost:5052/instr/status }}}