= WiMAX RF Aggregate Manager Service =
wimaxrf is a service to configure and control WIMAX (Basestation) RF Section7
== ARQ Control ==
{{{
Set ARQ parameters
ACK proc time [] (0)
ARQ block lifetime [] (5000)
Tx ACK delay [] (100)
Sync loss timeout [] (10000)
Delivery in order: true/false (true)
ARQ window size [0..1024] (1024)
RX purge timeout [] (5000)
Enable ARQ: true/false (false)
TX retry timeout [] (1000)
ARQ block size [0..(ARQ windows size/2)] (256)
RX retry timeout [] (1000)
}}}
== /default - Reset Basestation to Default parameters ==
{{{
Restore Base Station parameters from default configuration
}}}
== /get - Get Basestation Static Parameter ==
{{{
Get Basestation Static Parameter
}}}
{{{
Set HARQ parameters
Frame offset of UL ACK delay wrt to UL Burst [2,3] (3)
Frame offset of DL ACK delay wrt to DL Burst [1,2,3] (1)
MIMO HARQ support: true/false (IGNORED - mimo support not available for this BS)
PDU SN extended subheader reordering enabled: true/false (true)
Enable HARQ: true/false (false)
Maximum number of retransmissions [0..255] (4)
Maximum number of HARQ bursts per frame [0..255] (17)
}}}
== /info - Get the information about configuration parameters of the Base Station ==
{{{
Get information about the Base Station
Restart the Base Station
\u2212
\u2212
Restore Base Station parameters from saved configuration
\u2212
Set Basestation Static Parameter
\u2212
Get status of WiMAX RF service
}}}