= WiMAX RF Aggregate Manager Service =
wimaxrf is a service to configure and control WIMAX (Basestation) RF Section7
== ARQ Control ==
{{{
Set ARQ parameters
ACK proc time [] (0)
ARQ block lifetime [] (5000)
Tx ACK delay [] (100)
Sync loss timeout [] (10000)
Delivery in order: true/false (true)
ARQ window size [0..1024] (1024)
RX purge timeout [] (5000)
Enable ARQ: true/false (false)
TX retry timeout [] (1000)
ARQ block size [0..(ARQ windows size/2)] (256)
RX retry timeout [] (1000)
}}}
== /default - Reset Basestation to Default parameters ==
{{{
Restore Base Station parameters from default configuration
}}}
== HARQ Control ==
{{{
Set HARQ parameters
Frame offset of UL ACK delay wrt to UL Burst [2,3] (3)
Frame offset of DL ACK delay wrt to DL Burst [1,2,3] (1)
MIMO HARQ support: true/false (IGNORED - mimo support not available for this BS)
PDU SN extended subheader reordering enabled: true/false (true)
Enable HARQ: true/false (false)
Maximum number of retransmissions [0..255] (4)
Maximum number of HARQ bursts per frame [0..255] (17)
}}}
== /info - Get the information about configuration parameters of the Base Station ==
{{{
Get information about the Base Station
}}}
{{{
Get status of WiMAX RF service
}}}
== /restart - Restart the Base Station ==
{{{
Restart the Base Station
}}}
== /restore - Restore Base Station parameters from saved configuration ==
{{{
Restore Base Station parameters from saved configuration
service name="uploadr"/>
}}}
== /get - Get Basestation Parameter ==
{{{
Get Basestation Static Parameter
}}}
== /set - Set Basestation Parameter ==
{{{
Set Basestation Static Parameter
}}}