|Version 22 (modified by 9 years ago) ( diff ),|
9. WiMAX RF Aggregate Manager Service
wimaxrf is an Aggregate Manager (AM) that is used to configure and control WiMAX (Basestation) RF Section.
WiMAX RF Aggregate Manager
apt-get install omf-wimaxrf-aggmgr-5.2
Please confirm that the most current packages of the software are installed. You can check it
with the following commands.
dpkg -l | egrep 'omf-|asn-gw|click'
Current version for omf-common-5.2 is 4 and
Current version for omf-aggmgr-5.2 is 6
ii omf-aggmgr-5.2 ubuntu6 OMF Aggregate Manager ii omf-common-5.2 ubuntu4 Common ruby classes for OMF
In case of wrong version please remove the two packages and reinstall them.
apt-get --purge remove omf-aggmgr-5.2 omf-common-5.2 apt-get install omf-aggmgr-5.2 dpkg -l | grep omf-
The configuration file for wimxrf AM is in the same location as for all the other OMF AM services in /etc/omf-agggr-5.2/available/wimaxrf.yaml. The configuration file consists of multiple section sections relating to different components of the services.
Default parameter values are shown in ; Bold font indicates mandatory parameters.
database: dbFile: '/db/wimaxrf.db' reset: file: '/defaults/reset.xml'
- file: location of the default configuration [none]. The file is an XML file that containes default BS parameters and is used with /default wimaxrf service
asngw: if: eth1 ip: 10.3.0.71 rcvport: 54321 sndport: 54321 id: ASNGW000 tecnh: 3 dsc: IP-Config-Mgmt
bs: ip: 10.3.0.1 mask: 255.255.0.0 bsid: 44:51:DB:00:00:01 frequency: 2590000 stats: localoml: :omlServer: oml.orbit-lab.org interval: 10 globaloml: :omlServer: oml.orbit-lab.org
localoml section is used to specify OML server that will receive client related measurements while globaloml server section is used to configure parameters that are used by global GENI-wide logging process (should point at oml.orbit-lab.org until GENI gmoc takes over reporting function). Both are configured with two parameters:
- :omlServer:: value is the hostname of your OML server. If you wish to install the oml2 server on your host
locally, please do so by the following commands.
apt-get install oml2-server
and then point the omlServer value to your localhost.
Default interface for datapath outside endpoint:
datapath: datapathif: eth0
Each of the sections in this file should be modified to reflect your deployment configuration (please keep in mind that this is a YAML file and that it depends heavily on spaces and not TABs). Once the configuration file is ready, you have to enable the service by creating the symbolic link in /etc/omf-aggmgr-5.2/enabled:
ln -s ../available/wimaxrf.yaml
and restarting the OMF aggregate manager service:
# NOTE: use only 'spaces' to indent ! # ('tab' indents are not supported by the ruby yaml parser used to read this file) # # This is the Config file for the WiMAXRF GridService # --- wimaxrf: database: #sqlite db file dbFile: '/db/wimaxrf.db' reset: file: '/defaults/reset.xml' asngw: if: eth1 ip: 10.3.0.71 rcvport: 54321 sndport: 54321 id: ASNGW000 tecnh: 3 dsc: IP-Config-Mgmt bs: ip: 10.3.0.61 mask: 255.255.0.0 bsid: 44:51:DB:00:00:01 frequency: 2590000 stats: localoml: :omlServer: oml.orbit-lab.org interval: 10 globaloml: :omlServer: oml.orbit-lab.org datapath: datapathif: eth0