close
Warning:
Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.
- Timestamp:
-
Jul 18, 2011, 5:14:37 PM (13 years ago)
- Author:
-
ilya687
- Comment:
-
—
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v36
|
v37
|
|
243 | 243 | requirements set by [http://www.4pcb.com/ Advanced Circuits]. If using another vendor please be aware that the tolerances may be different. |
244 | 244 | |
245 | | |
| 245 | The following files are needed to make the board and attached to this page. Additionally the schematic is also provided as a reference. |
| 246 | * USB_mPCIx_Board.zip - These files describe the physical board. All fabrication houses should accept the gerber file format. |
| 247 | * USB_MPCIX.TOP & USB_MPCIX.BOT - Top and Bottom copper gerber files, respectively. |
| 248 | * USB_MPCIX.SMT & USB_MPCIX.SMB - Top and bottom soldermask gerber files, respectively. |
| 249 | * USB_MPCIX.SST - Top silkscreen gerber file. |
| 250 | * USB_MPCIX_thruhole.tap - Drill list gerber file. |
| 251 | * USB_mPCIx_Pop.zip - These files describe the position of the components. |
| 252 | * USB_MPCIX.AST - Assembly drawing of the board |
| 253 | * USB_MPCIX.SPT - Top solderpaste gerber file, there is only components on the top side. |
| 254 | * USB_MPCIX_BOM.xls - Bill of materials, provides links and vendors for parts being used. |
| 255 | * USB_MPCIX_INSERT.TXT - mounting locations for the components on the board. |