close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Version 42 (modified by ilya687, 9 years ago) ( diff )

12. GENI WiMAX Mobile Stations

12.1 Linux PC with Intel WiMAX Modem Card

12.1.1 Linux Laptop PC Platform

12.1.2 Intel 6250 WiMAX Modem Card

12.1.3 Installing Image

Samsung NC10 NetBook

The firmware, tools , network service and the patch were downloaded from LinuxWimax

  1. Compile a Linux Kernel to Version greater than 2.6.35 and reboot into that kernel.
  1. Install the i2400m firmware
    Download the i2400 firmware 1.5.0 version.
    Untar the source , cd to the directory and
      install -o root -g root -m 0644 *.sbcf /lib/firmware
  2. Install the Wimax Tools

First install libnl and libnl's development packages

   apt-get install libnl1 libnl-dev libglib2.0-0 libglib2.0-dev
   apt-get install build-essential pkg-config
   cd ~Download/wimax-tools-1.4.3 
   export I2400M=/lib/firmware/
   make install
  1. Build the libeap library
    To do that first install openssl libraries.
    apt-get install libglobus-openssl libglobus-openssl-dev libssl-dev 

Download the Supplicant from wpa-supplicant Untar and unzip the download

cd ~Downloads/wpa_supplicant-0.7.3
patch -p1 < PATH/wpa_supplicant-0.7.3-generate-libeap-peer.patch 
make -C src/eap_peer
make -C src/eap_peer install

Please do not forget to run ldconfig otherwise you will not be able to build the Wimax-Tools from Intel.

  1. Build the Intel-Wimax-Tools Untar and unzip the downloaded source and

cd ~Downloads/wimax-1.5.1

Copy the NDnSAgentConfig_forDriver.xml file to ./InfraStack/OSAgnostic/WiMax/Agents/NDnS/XML_Files or modify NSP_ID 51 in the file to look like

                                                <Text>GENI WiMAX Technical Support</Text>
                                                <Text>GENI Portal</Text>

Update the .bin files source files located at ./InfraStack/OSAgnostic/Product/AppSrvInfra/ with the GENI files

GENI Definition File

GENI Database File

Now configure the wimax service and install the service.

./configure --with-linux=/usr --with-libwimaxll=/usr --sysconfdir=/etc --localstatedir=/var --prefix=/usr --enable-instrument --with-wimax-db-bin=/var --with-ver-info-bin=/var
make install

This new configuration with the .bin enabled allows us now to modify the NDns parameters on the fly by modifying WiMAX_Def.bin and WiMAX_DB.bin files located in /var/lib/wimax directory.
You can edit the file and restart the wimaxd service to see the changes.

Connection and Scan Mode settings are set using the following commands

wimaxcu connectmode connect manual

wimaxcu connectmode scan semi

Instructions are Here

12.1.4 Downloading Complete Image

Based on Ubuntu 10.04 with compiled Kernel .35 and the Intel WiMAX driver source compiled on 8/25/2010 and with the GENI configuration file;

latest image for NC10!

12.1.5 Using the Service

  1. wimaxcu ron - Turn the Software Radio On
  1. wimaxcu plist - Check to See Geni Profile is Available
  1. wimaxcu scan wide - Scan all the available Base Stations
  1. wimaxcu connect network Geni - Connect to the GENI wimax station
  1. dhclient wmx0 - Obtain an IP address
  1. wimaxcu -i wmxX -b - Start the wimax service in background
  1. wimaxcu -i wmxX -k - Kill the wimax service

12.1.6 Enable debugging on the client

You can get enhanced debugging for the following parameters by increasing the verbosity level
echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_stack

echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill

echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset

echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg

echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table

echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs

12.2 Intel WiMAX Modem with USB Adaptor

12.2.1 Intel 6250 WiMAX Modem in USB Adaptor

12.2.2 PC Platforms

12.2.3 Installing Image

12.2.4 Manufacturing USB Adaptor

General Info

The WiMAX model USB adaptor is an 'open source' WINLAB designed board. This section provides links to the instructions and the files necessary to produce the board.
Please note that the instructions and files provided meet the specifications and requirements set by Advanced Circuits. If using another vendor please be aware that the tolerances may be different.

Files Needed

The following files are needed to make the board and attached to this page. Additionally the schematic is also provided as a reference.

  • - These files describe the physical board. All fabrication houses should accept the gerber file format.
    • USB_MPCIX.TOP & USB_MPCIX.BOT - Top and Bottom copper gerber files, respectively.
    • USB_MPCIX.SMT & USB_MPCIX.SMB - Top and bottom soldermask gerber files, respectively.
    • USB_MPCIX.SST - Top silkscreen gerber file.
    • USB_MPCIX_thruhole.tap - Drill list gerber file.
  • - These files describe the position of the components.
    • USB_MPCIX.AST - Assembly drawing of the board
    • USB_MPCIX.SPT - Top solderpaste gerber file, there is only components on the top side.
    • USB_MPCIX_BOM.xls - Bill of materials, provides links and vendors for parts being used.
    • USB_MPCIX_INSERT.TXT - mounting locations for the components on the board.

Fabrication and Population

The following set of instructions is specific to the production house WINLAB uses, Advanced Circuits. Other manufacturer may require additional information, however the process should be similar.
To have a board made the fabricated you must provide '' as it contains all the physical board information. Typically this can be sent directly to a sales representative for quoting. If you intend for the boards to be populated, some manufacturers (definitely Advanced Circuits) require minimum quantities and dimensions, so you may request for the board to be panelized to meet those conditions. WINLAB had them produced 4 boards to a panel to meet Advanced Circuit requirements. Some additional information that might be required is as follows:

Material Type: FR4
Material Thickness: 0.031"
Number of Layers: 2
First Dimension: 1.428"
Second Dimension: 2.668"
Finish Plating: LFSOLDER
Copper Outers: 1oz
Copper Inners: 0 oz
Solder Mask Sides Both
Solder Mask Type LPI
Solder Mask Color Green
Silkscreen Sides Top
Silkscreen Color White

If ordering through Advanced Circuits it is a good idea to run the design through the automated FreeDFM service. The design has already passed the check, but it also creates a quote matrix and populates any additional information on the board.
To have the board populated with parts send the additional zip file ( for quoting. The bill of materials (BOM) currently lists the right angle SMA header as not in use and 'do not install', if you wish to use it change that line in the BOM.

Attachments (5)

Note: See TracWiki for help on using the wiki.