Changes between Version 3 and Version 4 of WiMAX/30/02

Timestamp:

May 5, 2011, 3:35:06 PM (13 years ago)

Author:

seskar

Comment:

—

WiMAX/30/02

@@ -1 @@
-= A guide to wimax measurement application: wimax_gps_oml2 =
+= Wimax Measurement Application: wimax_gps_oml2 =
 == Description ==
-Collects Wimax radio link parameters with corresponding GPS coordinates and sends to OML server.
+Collects Wimax radio link parameters with corresponding GPS coordinates on the client and sends to OML server.
 The following parameters are recorded and sent to the OML server: Center frequency, RSSI, CINR, Transmit power, Time from GPS, Latidute, Longitude, Altitude.
+The source code is available at [source:/wimax_client/trunk]
 
 == Software Requirements ==
@@ -89 +90 @@
 
 == Sample data ==
-Here's a snapshot of drive data collected around the Wimax BS at Rugters Winlab. This is the RSSI drive data.
+Here's are the snapshots of drive data collected around the Wimax BS at Rugters Winlab. 
 
-[[Image(gps_drive_rssi.png)]]
+ || [[Image(gps_drive_rssi.png, width=500px)]] ||
+ || RSSI ||
+ || [[Image(gps_drive_cinr.png, width=500px)]] ||
+ || CINR ||
 
-The following is the CINR drive data.
-
-[[Image(GpsDriveCinr.png)]]
 
 
@@ -116 +117 @@
  * Under ''Track options'' for ''Colorize by'' select ''custom field'' from the pull down. Once the ''Custom colorization field'' appears enter ''rssi''.
  * Finally click ''Draw the map''
-
-Alternatively, OCTAVE or MATLAB can be used to process the data. The Octave script [http://wimax.orbit-lab.org/attachment/wiki/WiMAX/30/02/plot3d.m plot3d.m] was used to plot the RSSI in 3D from the datafile: [http://wimax.orbit-lab.org/attachment/wiki/WiMAX/30/02/exp5_rssi_oct.dat exp5_rssi_oct.dat].
-The following is a rudimentary 3D plot of the RSSI in front of Rutgers Winlab.
-[[Image(file.png)]]