Changes between Version 26 and Version 27 of WiMAX/30/05

Timestamp:

Jul 15, 2014, 2:47:42 PM (10 years ago)

Author:

Nilanjan Paul

Comment:

—

WiMAX/30/05

@@ -31 +31 @@
 Before the experiment, the BS parameters can be changed. The following are a few examples commands to control the MCS:[[BR]]
 * To set the BS parameters back to default configuration:
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/config/load?name=defaults'''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/bs/1/config/load?name=defaults'''
 
 * To get the current MCS:
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/mcsProfile'''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/bs/1/mcsProfile'''
 
 * Change downlink MCS to single profile:
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/mcsProfile?dl=15 '''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/bs/1/mcsProfile?dl=15 '''
 
 * Change downlink MCS with profile list: 
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/mcsProfile?dl=15,17,18'''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/bs/1/mcsProfile?dl=15,17,18'''
 
 * Change uplink MCS to single profile: 
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/mcsProfile?ul=15'''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/bs/1/mcsProfile?ul=15'''
 
 * Change uplink MCS with profile list:
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/bs/mcsProfile?ul=15,17,18'''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/bs/1/mcsProfile?ul=15,17,18'''
 
 * Revert BS back to default datapath configuration:
-  * '''$ wget -O status http://cons-wm-01:5052/wimaxrf/datapath/config/load?name=defaults'''
+  * '''$ wget -O status http://cons-wm-01:5054/wimaxrf/datapath/config/load?name=defaults'''
 
 * To restart the base station: 
-  * '''$ wget http://cons-wm-01:5052/wimaxrf/bs/restart'''
+  * '''$ wget http://cons-wm-01:5054/wimaxrf/bs/1/restart'''
 Please note: After issuing a restart the BS will need 2 minutes before accepting connection requests. [[BR]]
 For other details on changing BS parameters please refer to ''Basic Support Services'' under http://wimax.orbit-lab.org/wiki [[BR]]
@@ -188 +188 @@
  INFO exp: Request from Experiment Script: Wait for 5s....
  INFO exp: Setting attenuator level
---2012-02-10 11:02:21--  http://internal2dmz.orbit-lab.org:5052/instr/set?portA=4&portB=9&att=0
+--2012-02-10 11:02:21--  http://internal2dmz.orbit-lab.org:5054/instr/set?portA=4&portB=9&att=0
 Resolving internal2dmz.orbit-lab.org... 10.50.0.13
-Connecting to internal2dmz.orbit-lab.org|10.50.0.13|:5052... connected.
+Connecting to internal2dmz.orbit-lab.org|10.50.0.13|:5054... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 15
@@ -212 +212 @@
  INFO exp: Request from Experiment Script: Wait for 1s....
 Error: table t1 already exists
---2012-02-10 11:02:41--  http://internal2dmz.orbit-lab.org:5052/instr/set?portA=4&portB=9&att=5
+--2012-02-10 11:02:41--  http://internal2dmz.orbit-lab.org:5054/instr/set?portA=4&portB=9&att=5
 Resolving internal2dmz.orbit-lab.org... 10.50.0.13
-Connecting to internal2dmz.orbit-lab.org|10.50.0.13|:5052... connected.
+Connecting to internal2dmz.orbit-lab.org|10.50.0.13|:5054... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 15