| Version 2 (modified by , 9 years ago) ( diff ) |
|---|
Intel 6250
Table of Contents
Driver Installation
The firmware, tools , network service and the patch were downloaded from LinuxWimax
- Compile a Linux Kernel to Version greater than 2.6.35 and reboot into that kernel.
- Install the i2400m firmware
Download the i2400 firmware 1.5.0 version.
Untar the source , cd to the directory and
install -o root -g root -m 0644 *.sbcf /lib/firmware
- Install the Wimax Tools
First install libnl and libnl's development packages
apt-get install libnl1 libnl-dev libglib2.0-0 libglib2.0-dev apt-get install build-essential pkg-config cd ~Download/wimax-tools-1.4.3 export I2400M=/lib/firmware/ ./configure make make install
- Build the libeap library
To do that first install openssl libraries.
apt-get install libglobus-openssl-module0 libglobus-openssl-module-dev libssl-dev
Download the Supplicant from wpa-supplicant Untar and unzip the download
cd ~Downloads/wpa_supplicant-0.7.3 patch -p1 < ../wpa_supplicant-0.7.3-generate-libeap-peer.patch make -C src/eap_peer make -C src/eap_peer install ldconfigPlease do not forget to run ldconfig otherwise you will not be able to build the Wimax-Tools from Intel.
- Build the Intel-Wimax-Tools Untar and unzip the downloaded source and
cd ~Downloads/wimax-1.5.1
Copy the NDnSAgentConfig_forDriver.xml file to ./InfraStack/OSAgnostic/WiMax/Agents/NDnS/XML_Files or modify
NSP_ID 51 in the file to look like
<geni>
<NetworkParameters>
<H_NSP>
<x0>
<H_NSP_ID>51</H_NSP_ID>
</x0>
</H_NSP>
<CAPL>
<Entries>
<x0>
<NAP_ID>4451DB</NAP_ID>
<Priority>1</Priority>
<ChPlanRefIds>
<x0>
<RefId>AB</RefId>
</x0>
</ChPlanRefIds>
</x0>
</Entries>
<Any>ListFirst</Any>
<SelectPolicy>Strict</SelectPolicy>
</CAPL>
<RAPL>
<Entries></Entries>
<Any>ListFirst</Any>
<SelectPolicy>Strict</SelectPolicy>
</RAPL>
<ChannelPlan>
<Entries>
<x0>
<Id>AB</Id>
<FirstFreq>2590000</FirstFreq>
<LastFreq>2590000</LastFreq>
<NextFreqStep>10000</NextFreqStep>
<Preambles>ffffffffffffffffffffffffffffff</Preambles>
<BW>10000</BW>
<FFTSize>1024</FFTSize>
<DuplexMode>1</DuplexMode>
<TTL>0</TTL>
</x0>
</Entries>
<BW>-1</BW>
<FFTSize>-1</FFTSize>
<DuplexMode>1</DuplexMode>
</ChannelPlan>
<OperatorName>GENI</OperatorName>
<PollingInterval>-1</PollingInterval>
<PollingAttempts>10</PollingAttempts>
<ServerID></ServerID>
</NetworkParameters>
<SubscriptionParameters>
<Primary>
<Name></Name>
<Activated>False</Activated>
<EAP>
<x0>
<METHOD_TYPE>EAP_TLS</METHOD_TYPE>
<VENDOR_ID>13</VENDOR_ID>
<VENDOR_TYPE>13</VENDOR_TYPE>
<USER_IDENTITY></USER_IDENTITY>
<PROVISIONED_PSEUDO_IDENTITY></PROVISIONED_PSEUDO_IDENTITY>
<PASSWORD></PASSWORD>
<REALM>www.geni.net</REALM>
<USE_PRIVACY>False</USE_PRIVACY>
<ENCAPS>-1</ENCAPS>
<VFY_SERVER_REALM>False</VFY_SERVER_REALM>
<SERVER_REALMS></SERVER_REALMS>
<CERT>
<x0>
<CERT_TYPE></CERT_TYPE>
<SER_NUM></SER_NUM>
<ISSUER></ISSUER>
</x0>
<x1>
<CERT_TYPE></CERT_TYPE>
<SER_NUM></SER_NUM>
<ISSUER></ISSUER>
</x1>
</CERT>
</x0>
</EAP>
</Primary>
<OtherSubscriptions></OtherSubscriptions>
</SubscriptionParameters>
<Contacts>
<x0>
<Type>0</Type>
<URI>http://wimax.orbit-lab.org</URI>
<Text>GENI WiMAX Technical Support</Text>
</x0>
<x1>
<Type>1</Type>
<URI>http://www.geni.net</URI>
<Text>GENI Portal</Text>
</x1>
</Contacts>
</geni>
Update the .bin files source files located at ./InfraStack/OSAgnostic/Product/AppSrvInfra/ with the GENI files
Now configure the wimax service and install the service.
./configure --with-linux=/usr --with-libwimaxll=/usr --sysconfdir=/etc --localstatedir=/var --prefix=/usr --enable-instrument --with-wimax-db-bin=/var --with-ver-info-bin=/var make make install
This new configuration with the .bin enabled allows us now to modify the NDns parameters on the fly by modifying WiMAX_Def.bin and WiMAX_DB.bin files located in /var/lib/wimax directory.
You can edit the file and restart the wimaxd service to see the changes.
Connection and Scan Mode settings are set using the following commands
wimaxcu connectmode connect manual wimaxcu connectmode scan semi
Using the Service
- wimaxcu ron - Turn the Software Radio On
- wimaxcu plist - Check to See Geni Profile is Available
- wimaxcu scan wide - Scan all the available Base Stations
- wimaxcu connect network Geni - Connect to the GENI wimax station
- dhclient wmx0 - Obtain an IP address
- wimaxcu -i wmxX -b - Start the wimax service in background
- wimaxcu -i wmxX -k - Kill the wimax service
Enable debugging on the client
You can get enhanced debugging for the following parameters by increasing the verbosity level
echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_stack echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs
