close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 22 and Version 23 of cLTE/cHardware/cAirSynergy


Ignore:
Timestamp:
May 3, 2016, 3:46:27 PM (8 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • cLTE/cHardware/cAirSynergy

    v22 v23  
    7474===== Serial Debug =====
    7575
    76   The base station has a 9 pin connector (hidden behind a black hex bolt next to the port marked "ETH") which allows access to the serial console. This is useful for recovery purposes when the base station does not respond via software, SSH, or web interfaces. See [wiki:cLTE/cHardware/cAirSynergy/ Airspan LTE Base Station Serial Console] for information on cable construction and serial port parameters. Note that the !AirSyngery only has the "asil8xx" serial port functioning (TX2,RX2 in the referenced document). However, the other internal module can still be accessed via ssh once logged into the asil8xx module via the serial port.
     76  The base station has a 9 pin connector (hidden behind a black hex bolt next to the port marked "ETH") which allows access to the serial console. This is useful for recovery purposes when the base station does not respond via software, SSH, or web interfaces. See [wiki:cLTE/cHardware/cAirSynergy/AirspanLTEBaseStationSerialConsole Airspan LTE Base Station Serial Console] for information on cable construction and serial port parameters. Note that the !AirSyngery only has the "asil8xx" serial port functioning (TX2,RX2 in the referenced document). However, the other internal module can still be accessed via ssh once logged into the asil8xx module via the serial port.
    7777
    7878[[br]]