Changes between Version 28 and Version 29 of cLTE/cHardware/cAirSynergy

Timestamp:

May 5, 2017, 10:03:53 PM (6 years ago)

Author:

jkol

Comment:

—

cLTE/cHardware/cAirSynergy

@@ -4 +4 @@
 ==== Hardware Installation ====
 
-  !AirSynergy Connections:
+  Fully connected !AirSynergy without weatherproofing covers should look like this:
 
-  [[Image(Slide1.PNG, width=400px)]]
+  [[Image(airsynergy_connections.jpg, width=400px)]]
 
-  || 1. || Networking || Copper ethernet (1000BASE-T) ||
+  || 1. || GPS || TNC connector to GPS antenna ||
   || 2. || Power || Connect power cable to -48 power supply with the provided cable||
   || 3. || Serial Console (optional) || If needed for debugging ||
-
-[[br]]
-  Fully connected !AirSynergy without weatherproofing covers should look like this:
-
-  [[Image(as2000-populated.jpg, width=400px)]]
+  || 4. || Networking || Copper ethernet (1000BASE-T) ||
 
 [[br]]
@@ -29 +25 @@
 ====== Power Supply !Connector/Cable ======
 
-  TODO
-
   The !AirSynergy supports direct connection to a -48VDC nominal power source. 
   Operating Voltage Range: -40.5 to 57 VDC
 
   A power supply capable of 2A or greater is recommended (eg. Mean Well CLG-100-48).
+
+  Use the provided power connector and cable to connect the basestation to the power supply.
+
+  [[Image(airsynergy_power_cable.jpg, width=250px)]]
+
+  Wire colors:
+  || V+ || black wire ||
+  || V- || white wire ||
 
 [[br]]