Changes between Version 29 and Version 30 of cLTE/cHardware/cAirSynergy

Timestamp:

May 5, 2017, 10:11:32 PM (7 years ago)

Author:

jkol

Comment:

—

cLTE/cHardware/cAirSynergy

@@ -14 +14 @@
 
 [[br]]
-===== Power Supply =====
+===== Power Supply & !Connector/Cable =====
 
   The !AirSynergy supports direct connection to a -48VDC nominal power source.
@@ -21 +21 @@
   A power supply capable of 120W or greater is recommended (eg. Mean Well CLG-100-48).
 
-  [[Image(Slide2.PNG, width=600px)]]
-
-====== Power Supply !Connector/Cable ======
-
-  The !AirSynergy supports direct connection to a -48VDC nominal power source. 
-  Operating Voltage Range: -40.5 to 57 VDC
-
-  A power supply capable of 2A or greater is recommended (eg. Mean Well CLG-100-48).
-
-  Use the provided power connector and cable to connect the basestation to the power supply.
+  Use the included power connector and cable wired up as follows to connect the basestation to the power supply.
 
   [[Image(airsynergy_power_cable.jpg, width=250px)]]
 
-  Wire colors:
-  || V+ || black wire ||
-  || V- || white wire ||
+  || ''Wire Color'' || ''Connect To'' ||
+  || black || V+ ||
+  || white || V- ||
+
+  ''Note the triangular key on the outer plastic ring between the V+ and V- pins.''
 
 [[br]]