close
Warning:
Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.
- Timestamp:
-
Aug 18, 2015, 4:58:44 PM (9 years ago)
- Author:
-
seskar
- Comment:
-
—
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v13
|
v14
|
|
55 | 55 | === Configure Networking === |
56 | 56 | |
57 | | For proper console operation, The console is expected to be connected to 4 Networks. Their respective names and purposes are: |
58 | | * Data - For experiment traffic, Ideally this is in a separate switch plane to avoid mixing / clobbering control traffic |
59 | | * CM - Low speed network for soft control of power and terminal output of each node |
60 | | * Control - Management and control traffic to the Nodes. This network is used for imaging and is needs to be fast. Ideal on a non-blocking switch with good back plane throughput. |
| 57 | For proper operation, the console is expected to be connected to multiple networks. Their respective names and purposes are: |
| 58 | * Data - For experiment traffic, Ideally this is in a separate switch plane to avoid mixing / clobbering control traffic (''default IP range: 10.20.X.Y'') |
| 59 | * CM - Low speed network for soft control of power and terminal output of each node (''default IP range: 10.1.X.Y'') |
| 60 | * Control - Management and control traffic to the Nodes. This network is used for imaging and is needs to be fast. Ideal on a non-blocking switch with good back plane throughput. (''default IP range: 10.10.X.Y'') |
| 61 | * GENI Control - GENI-wide control network that provides global BS management services (''default IP range: 10.3.U.X'') |
| 62 | * GENI Data - GENI-wide network for wireless client traffic (''default IP range: 10.43.U.Y'') |
61 | 63 | * Outside - External access for the console. Mostly for remote control and package updates. |
62 | 64 | |