Version 2 (modified by 9 years ago) ( diff ) | ,
---|
OS Installation
Table of Contents
Disk Partitioning
While setting up Ubuntu server, partition the disk as follows:
- 20 GB Primary boot partition
- 20 GB Home directory
- 116 GB create a new mount point /Export for images
- 4 GB Swap . Set the 'location' as end, and set 'use as' to swap area.
Configure Host Name
/etc/hosts /etc/hostname
Configure Networking
- Four networks
- Data
- CM
- Control
- Outside
Setup networking as follows on the console host
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The CM network interface auto eth1 iface eth1 inet static address 10.1.0.254 netmask 255.255.255.0 broadcast 10.1.0.255 # The Control network interface auto eth3 iface eth3 inet static address 10.10.0.254 netmask 255.255.255.0 broadcast 10.10.0.255 # The Data network interface auto eth0 iface eth0 inet static address 10.20.0.254 netmask 255.255.255.0 broadcast 10.20.0.255 # The primary network interface auto eth2 iface eth2 inet dhcp
Note:
See TracWiki
for help on using the wiki.