wiki:dSite/c0OMF
close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Version 18 (modified by ssugrim, 6 years ago) ( diff )

Install OMF Services and Dependencies

Table of Contents

    Configure Apt Repository

    To begin we'll need to add the Orbit apt repository to the list of sources that our console will pull packages from. This is done by running the follwing two commands.

    Note: It is assumed that you have root access and can run these commands as root if needed

    The first installs the orbit repositories gpg-key into the consoles key-ring.

    wget -qO - http://packages.orbit-lab.org/downloads/orbitapt.gpg.key | sudo apt-key add -
    

    Next we download the source list for the repository.

    wget -qO /etc/apt/sources.list.d/orbit.list http://packages.orbit-lab.org/downloads/orbit-precise.list
    

    Once we have these changes in place, we need to update the repository list via

    apt-get update
    

    Install Services

    All the services can be installed via a single container package:

    apt-get install omf-aggmgr-geni-5.4
    

    This will install:

    The following extra packages will be installed:
      apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common auth-client-config bind9 bind9utils binutils cpp cpp-4.6 frisbee gcc gcc-4.6 gnutls-bin imagezip isc-dhcp-server ldap-auth-client
      ldap-auth-config ldap-utils ldapscripts libapache2-mod-php5 libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libc-bin libc-dev-bin libc6 libc6-dev libcap2 libdbd-mysql-perl libdbi-perl
      libgomp1 libhtml-template-perl libltdl7 liblua5.1-0 libmpc2 libmpfr4 libmysql-ruby1.9.1 libmysqlclient-dev libmysqlclient18 libnet-daemon-perl libnss-ldap libodbc1 libpam-ldap libperl5.14 libplrpc-perl
      libquadmath0 libruby1.9.1 libslp1 libsqlite3-ruby1.9.1 libssl0.9.8 libterm-readkey-perl libyaml-0-2 linux-libc-dev make manpages-dev mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server
      mysql-server-5.5 mysql-server-core-5.5 nmap omf-aggmgr-accountingcommon-5.4 omf-aggmgr-accountmanagement-5.4 omf-aggmgr-autoapprover-5.4 omf-aggmgr-cmc-5.4 omf-aggmgr-common-5.4
      omf-aggmgr-controlpanel-5.4 omf-aggmgr-delegatedam-5.4 omf-aggmgr-frisbee-5.4 omf-aggmgr-genimon-5.4 omf-aggmgr-instr-5.4 omf-aggmgr-inventory-5.4 omf-aggmgr-pxe-5.4 omf-aggmgr-result-5.4
      omf-aggmgr-saveimage-5.4 omf-aggmgr-scheduler-5.4 omf-aggmgr-status-5.4 omf-aggmgr-wimaxrf-5.4 omf-common-5.4 perl perl-base perl-modules php5-cli php5-common php5-fpm php5-ldap phpldapadmin pwgen
      ruby-mysql ruby-sqlite3 ruby1.9.1 ruby1.9.1-dev sharutils slapd sqlite3 ssl-cert tftpd-hpa zlib1g-dev
    Suggested packages:
      apache2-doc apache2-suexec apache2-suexec-custom libpam-cracklib bind9-doc binutils-doc cpp-doc gcc-4.6-locales gcc-multilib autoconf automake1.9 libtool flex bison gdb gcc-doc gcc-4.6-multilib
      libmudflap0-4.6-dev gcc-4.6-doc libgcc1-dbg libgomp1-dbg libquadmath0-dbg libmudflap0-dbg binutils-gold isc-dhcp-server-ldap php-pear glibc-doc libipc-sharedcache-perl nscd libmyodbc odbc-postgresql
      tdsodbc unixodbc-bin slpd openslp-doc make-doc tinyca mailx perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl libpod-plainer-perl php5-suhosin ruby1.9.1-examples ri1.9.1 graphviz sqlite3-doc
      openssl-blacklist syslinux-common
    The following NEW packages will be installed:
      apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common auth-client-config bind9 bind9utils binutils cpp cpp-4.6 frisbee gcc gcc-4.6 gnutls-bin imagezip isc-dhcp-server ldap-auth-client
      ldap-auth-config ldap-utils ldapscripts libapache2-mod-php5 libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libc-dev-bin libc6-dev libcap2 libdbd-mysql-perl libdbi-perl libgomp1
      libhtml-template-perl libltdl7 liblua5.1-0 libmpc2 libmpfr4 libmysql-ruby1.9.1 libmysqlclient-dev libmysqlclient18 libnet-daemon-perl libnss-ldap libodbc1 libpam-ldap libperl5.14 libplrpc-perl
      libquadmath0 libruby1.9.1 libslp1 libsqlite3-ruby1.9.1 libssl0.9.8 libterm-readkey-perl libyaml-0-2 linux-libc-dev make manpages-dev mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server
      mysql-server-5.5 mysql-server-core-5.5 nmap omf-aggmgr-accountingcommon-5.4 omf-aggmgr-accountmanagement-5.4 omf-aggmgr-autoapprover-5.4 omf-aggmgr-cmc-5.4 omf-aggmgr-common-5.4
      omf-aggmgr-controlpanel-5.4 omf-aggmgr-delegatedam-5.4 omf-aggmgr-frisbee-5.4 omf-aggmgr-geni-5.4 omf-aggmgr-genimon-5.4 omf-aggmgr-instr-5.4 omf-aggmgr-inventory-5.4 omf-aggmgr-pxe-5.4
      omf-aggmgr-result-5.4 omf-aggmgr-saveimage-5.4 omf-aggmgr-scheduler-5.4 omf-aggmgr-status-5.4 omf-aggmgr-wimaxrf-5.4 omf-common-5.4 php5-cli php5-common php5-fpm php5-ldap phpldapadmin pwgen ruby-mysql
      ruby-sqlite3 ruby1.9.1 ruby1.9.1-dev sharutils slapd sqlite3 ssl-cert tftpd-hpa zlib1g-dev
    The following packages will be upgraded:
      libc-bin libc6 perl perl-base perl-modules
    

    during the install process you will be prompted to answer the following questions. The order may not match up, but each will be asked.

    1. MySQL Installation Questions You will be prompted for a MySQL admin password during the install. Please note the password specified, it will be required for service config later.
    2. LDAP Server Installation Questions You will be promted for Ldap root passwords. The password you specify must match the password you give when configuring the client. The installer will guess the organizational structure for LDAP based on FQDN that was set during installation. For example if your machine name is console.geni.rutgers.edu, it will assume the domain is:
      geni.rutgers.edu => dc=geni,dc=rutgers,dc=edu
      
      Note: For the rest of this guide we assume the domain is dc=geni,dc=rutgers,dc=edu. Please adjust this domain to match your FQDN.
    3. LDAP Client Installation Questions When installing it, you will be asked for the following information:
      • base dc=geni,dc=rutgers,dc=edu
      • uri ldap://localhost/
      • ldap_version 3
      • rootbinddn cn=admin,dc=geni,dc=rutgers,dc=edu
      Use the defaults for any questions not mentioned here (this configuration will be overwritten by the OS setup script in the next section).
    4. Postfix Installation Questions Postfix will present 5 choices:
      • No configuration
      • Internet Site
      • Internet with smarthost
      • Satellite System
      • Local only
      This configuration is required but is beyond the scope of this guide. Please confer with you site's administrators as to what the appropriate e-mail routing should be. If e-mail is not configured, various notification e-mails will not be sent.

    Install and Configure OpenFire (XMPP)

    1. Install Java and Openfire 3.8.0 and Java - as root do:
      apt-get install default-jre-headless
      wget -O openfire.deb http://www.igniterealtime.org/downloadServlet?filename=openfire/openfire_3.8.0_all.deb
      dpkg -i openfire.deb
      
    2. In the /etc/java-6-openjdk/security/java.security file, comment out the following line:
        security.provider.9=sun.security.pkcs11.SunPKCS11 ${java.home}/lib/security/nss.cfg
      
    3. Open /etc/init.d/openfire file in an editor and add JAVA_HOME pointing to the correct java directory:
        JAVA_HOME=/usr
      
      this should be inserted before the attempt to use the JAVA_HOME variable. e.g.:
      ### END INIT INFO 
      
      JAVA_HOME=/usr
      # Attempt to locate JAVA_HOME, code borrowed from jabref package
      if [ -z $JAVA_HOME ]
      then   
              t=/usr/lib/jvm/java-1.5.0-sun && test -d $t && JAVA_HOME=$t
              t=/usr/lib/jvm/java-6-sun && test -d $t && JAVA_HOME=$t
      fi
      
    4. Start openfire using command
        /etc/init.d/openfire start
      
    5. Check if openfire is running: ps -ef | grep java . Startup can take a while, please be patient. You should see a line like:
      openfire 13150     1 17 16:52 ?        00:00:01 /usr/bin/java -server -DopenfireHome=/usr/share/openfire -Dopenfire.lib.dir=/usr/share/openfire/lib -classpath /usr/share/openfire/lib/startup.jar -jar /usr/share/openfire/lib/startup.jar
      
    6. Direct your web browser to http://console.geni.rutgers.edu:9090 and begin the setup wizard. It should look like:
    7. Choose your language and click continue
    8. Use the FQDN for the Domain entry in this form (e.g. console.geni.rutgers.edu). Let the port numbers as the default values (i.e. 9090 and 9091).
    9. Choose the embedded database and continue.
    10. Choose the default profile and click continue
    11. Enter an admin e-mail address and password, then click continue. The default username is admin, and together with the specified password, will be used to access the openfire console.
    12. You should be able to login to this console now with the specified credentials.

    Attachments (7)

    Download all attachments as: .zip

    Note: See TracWiki for help on using the wiki.