close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 7 and Version 8 of dSite


Ignore:
Timestamp:
Oct 8, 2014, 12:17:00 PM (6 years ago)
Author:
seskar
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • dSite

    v7 v8  
    33[[TOC(WiMAX/dSite*, depth=2)]]
    44
    5 The site installation process has several major phases. The [wiki:./hardwaresetuplink hardware setup] establishes the wiring layout and switching requirements for nodes and the console. The nodes can be easily distinguished from the console by the number of Ethernet ports they have. Consoles require 4 ports and nodes only 3. All of the software setup is done on the console since the nodes have their operating system pushed onto them via the OMF imaging infrastructure that we are going to build on the console.
     5Typical site GENI 4G wireless deployment is shown in Figure 1.
     6[[Image(GENI Setup.jpg, width=600)]]. The [wiki:./hardwaresetuplink hardware setup] establishes the wiring layout and switching requirements for nodes and the console. The nodes can be easily distinguished from the console by the number of Ethernet ports they have. Consoles require 4 ports and nodes only 3.
     7
     8The site software installation process has several major phases. All of the software setup is done on the console since the nodes have their operating system pushed onto them via the OMF imaging infrastructure that we are going to build on the console.
    69
    710To setup the console software, we have to [wiki:./b0OS install a base operating system] (based on Ubuntu 12.04), [wiki:./c0OMF install the omf services] and configure them. The services that need to be configured are: