close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Changes between Version 11 and Version 12 of aWiMAX/cHardware/aBS/cAirspan/cInstallation


Ignore:
Timestamp:
Jun 5, 2012, 4:42:06 PM (12 years ago)
Author:
agosain
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • aWiMAX/cHardware/aBS/cAirspan/cInstallation

    v11 v12  
    1313The following parts are needed for installation:
    1414
    15   || 1. || 370+ W Power supply ||  Even though Airspan 2.X Ghz operation has a maximum consumption of 370 Watts, -48V power supply rated for 450W is suggested. One candidate is [http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2105164_-1 Mean Well SE-450-48]. ||
     15  || 1. || 370+ W Power supply ||  Even though Airspan 2.X Ghz operation has a maximum consumption of 370 Watts, -48V power supply rated for 450W is suggested. One candidate is [http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2105164_-1 Mean Well SE-450-48]. Make sure the voltage selector switch is at 115V position before powering on the unit ||
    1616  || 2. || Power cable with custom connector (shipped with airspan BS) || [[Image(Air4gPS.jpg, width=200, align=right)]] This power cable is an unearthed DC cable and is approx 75 feet long. If that is long enough, it should be attached to the power supply as shown in figure 1;  in case longer cable is needed, use an off the shelf 18AWG 3C cable and solder it together to reach the power source. ||
    1717  || 3. || Appropriate length weatherproof CAT5E/CAT6 cable. || Bulk cable candidate for outdoor use is [http://www.cdw.com/shop/products/BELKIN-1000ft-CAT5E-DIRECT-BURIAL-CABLE/1302244.aspx Belkin Direct Burial Cable]. Once cable is in place, Ethernet RJ45 connectors have to be placed at both ends; make sure that the Ethernet cable is passed through the "Weatherproof Ethernet connector" (shipped with airspan), before the head is put on. ||