|Version 4 (modified by 6 years ago) ( diff ),|
Table of Contents
1. Power Connect power cable to -48 power supply with the provided cable; [Mean Well SP3XXX] 2. Networking Insert SFP+ and connect; list of supported SFP+s 3. Serial Console (optional) If needed for debugging
Fully connected AirSynergy without weatherproofing covers should look like this:
The AirSynergy supports direct connection to a -48VDC nominal power source.
Operating Voltage Range: -40.5 to 57 VDC
Power connector pinout:
Compatible SFP+ Adapters
The following SFP+ adapters were tested for compatibility with the AirSynergy.
Fiber connections were tested with:
Type Manufacturer Model MMF Intel FTLX8571D3BCV-IT SMF Intel FTLX1471D3BCV-IT
CAT5/CAT6 (Copper Gigabit Ethernet)
Manufacturer Model Note Avago abcu-5730arz 1g (T)
Manufacturer Model Note Dell ftlx8571d3bcl 1g/10g (SR) Finisar ftlx8571bcv Intel afbr-703sdz-in2 Iwnetworks iw-trsfpl-sr Finisar sfp-10gsr-85 Trendnet teg-mgbsx Cisco 1000base-sx
Manufacturer Model Note Dell ftlx1471d3bcl