wiki:cLTE/cHardware/cAirSynergy
close Warning: Can't synchronize with repository "(default)" (/common/SVN/wimax does not appear to be a Subversion repository.). Look in the Trac log for more information.

Version 6 (modified by jkol, 4 years ago) ( diff )

AirSynergy 2000

Hardware Installation

AirSynergy Connections:

No image "Slide1.PNG" attached to cLTE/cHardware/cAirSynergy

1. Power Connect power cable to -48 power supply with the provided cable; [Mean Well SP3XXX] No image "Slide2.PNG" attached to cLTE/cHardware/cAirSynergy
2. Networking Insert SFP+ and connect; list of supported SFP+s
3. Serial Console (optional) If needed for debugging

Fully connected AirSynergy without weatherproofing covers should look like this:

No image "as2000-populated.jpg" attached to cLTE/cHardware/cAirSynergy

Power Supply

The AirSynergy supports direct connection to a -48VDC nominal power source.
Operating Voltage Range: -40.5 to 57 VDC

The base station end of the power cable uses a Molex 0039012040 housing (Digikey: WM3701-ND) with Molex 0039000039 pins (Digikey: WM2501-ND).

Housing: No image "airsynergy_power_connector_housing.png" attached to cLTE/cHardware/cAirSynergy

Power connector pinout:

No image "airsynergy_power_connector_pinout.jpg" attached to cLTE/cHardware/cAirSynergy

Compatible SFP+ Adapters

The following SFP+ adapters were tested for compatibility with the AirSynergy.

NOTE: Fiber connections were tested with the following adapters on the "server" side:

Type Manufacturer Model
MMF Intel FTLX8571D3BCV-IT
SMF Intel FTLX1471D3BCV-IT
CAT5/CAT6 (Copper Gigabit Ethernet)
Manufacturer Model Note
Avago abcu-5730arz 1g (T)
Multi-mode Fiber
Manufacturer Model Note
Dell ftlx8571d3bcl 1g/10g (SR)
Finisar ftlx8571bcv
Intel afbr-703sdz-in2
Iwnetworks iw-trsfpl-sr
Finisar sfp-10gsr-85
Trendnet teg-mgbsx
Cisco 1000base-sx
Single-mode Fiber
Manufacturer Model Note
Dell ftlx1471d3bcl

Software Installation

Attachments (3)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.